Kim Aldous
- Total activity 34
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 1
Activity overview
Latest activity by Kim Aldous-
Kim Aldous created an article,
What does S2 mean on my Rego1/AlertMaxx2 and how can I clear it?
What does S2 mean? If you have an S2 on either a Rego1 or an AlertMaxx2 this means that the internal battery counter has reached 0. The AlertMaxx2 and Rego1 do not show S2 to indicate that the batt...
-
Kim Aldous created an article,
How do I wire an AwareMaxx into an AlertMaxx2 or Rego1?
Following the wiring guidance below. Remember to link out the IN & +6V with a link wire.
-
Kim Aldous created an article,
How do I wire in a 6V beacon into the AlertMaxx2 or Rego1?
Follow the wiring guidance shown below. Remember to link out the IN & +6V with a link wire.
-
Kim Aldous created an article,
-
Kim Aldous created an article,
-
Kim Aldous created an article,
-
Kim Aldous created an article,
-
Kim Aldous created an article,
How do I connect to the Rego1 volt free relay?
The Rego1 has volt free contacts to connect external devices such as an alarm or beacon. When the high level alarm is activated, the relay sends a signal continuously. The volt free relay is design...
-
Kim Aldous created an article,
When installing my AlertMaxx2, I get a constant F1 code, why?
There are a few possible reasons for a constant F1 code. The float switch isn't wired in. The finger float switch is upside down in the housing. If using a pendant float switch, the wrong cores ha...
-
Kim Aldous created an article,